Characteristics and precautions of 3D mixer

Characteristics of 3D mixer:

1. The design concept of the mixing cylinder of the 3D mixer is unique. The inner cavity of the human body has undergone high-precision polishing and polishing, with no dead corners or environmental pollution materials. When discharging, the materials are discharged successfully under the weight and efficiency, leaving no remaining materials. It has the advantages of no environmental pollution, easy discharge, no accumulation of materials, and easy cleaning

2. Low vibration, low noise, adjustable fixtures, easy installation and maintenance, long service life;

3. Due to the multi-directional fitness exercise of the mixing cylinder, there are many mixing points for the materials in the cylinder body, and the mixing effect is significant. Its mixing uniformity is higher than that of a general mixer, and the deviation of the uniformity of the drug ingredients is smaller than that of a general mixer. In addition, many three-dimensional mixers have a larger capacity than general mixers, with a capacity of 40% of the total capacity of the cylinder body, which is more than twice as high as 85%;

4. Mixing materials in a sealed environment is less likely to cause environmental pollution to the office environment;

5. The aspect ratio is low, the indoor space for rotation is small, and engineering buildings (technical partitions) generally do not require a notorious floor. The total area of the outer sphere is small.

Common problems with 3D mixer:

1. When loading and unloading materials, the electric type of the 3D mixer must be turned off to prevent household appliances from malfunctioning and causing unnecessary safety accidents;

2. The mixing of the 3D mixer is a three-dimensional space mixing, and a safety maintenance column is added to the reasonable range of the material barrel to prevent accidents in human life and road safety production;

3. Before starting, do not stand up in front of the head to prevent accidents.

Common mixers are divided into four categories: steam and high viscosity liquid mixers, medium low viscosity liquid and sludge mixers, and powder and granular solid material mixing mechanical equipment. The 3D mixer is a novel material mixer commonly used in manufacturing industries such as pharmaceuticals, chemical plants, food, light industry, and research institutions.